Waterborne architectural coatings
Natural genuine stone lacquer
Di Sheng Natural Genuine stone lacquer is our company's latest technology in Germany. Exterior decorative paint, can be widely used in cement buildings, wood structures, cardboard, gypsum surface, paint can make buildings reflect the natural and stable granite texture the simulation rate is over 90%. The utility model has the advantages of convenient construction, and is an ideal material for indoor and outdoor decoration, craft modeling and city sculpture.
Natural stone paint accessory products
Water-based alkali-resistant sealing primer--natural stone paint--waterborne silicon-propylene coating.
1, the use of natural marble, granite as the base material, can create a variety of patterns and colors;
2, mildew, algae growth, can be applied to the sea and mountainous areas and other climatic conditions;
3, water resistance and excellent scrubbing resistance and stain resistance;
4, natural colors, anti-aging, long service life.
Scope of application
Applicable to large public buildings, such as gyms, museums, conference centers, etc., can also be used for exterior decoration of high-end apartments, office buildings and other buildings.
1, Stir the paint in the tank well before use;
2, apply a special primer again;
3, the primer can be sprayed with natural stone paint after drying for 2-6 hours;
4, spray natural stone paint twice, thickness: about 2mm. Spray gun pressure: between 6-8kg.
5, Use sandpaper to clean and smooth the sharp particles and floating sand on the surface of real stone paint (no sharp corners and loose sand particles), and then use high-pressure gas to blow away dust.
6, drying 24-28 hours after spraying the surface paint again.
Paint consumption: 3-5.5kg/m² (two times the theoretical value).
Construction Tools: Special Stone Paint Spray Gun.
Construction temperature: 5-40 °C.
Storage temperature: 5-35 °C, valid for one year.
Tips: The construction tools should be cleaned with water immediately after use. Unused paint should be sealed and kept in a cool place.
|Container status||No lump after mixing;|
|Construction||Spraying without difficulty|
|Low temperature stability||Not deteriorating|
|Drying time||Table dry≤4h|
|Water resistance||96h no exception|
|Alkali resistance||96h no exception|
|Coating temperature change||10 cycles without exception|
|Stain resistance||Less than 2 levels after 5 cycles of testing|
|Resistance to artificial aging / 500h||No blistering, no peeling, no cracks|
|Bonding strength (standard state)||≥0.70MPa|