Online customer service
Customer service hotline
15858113966
Customer service team:
在线客服
QQ:
QQ:
Service time:
7:30 - 17:30
  • TEL: 400-926-0277 / +86-571-82171320 / 15858113966
  • FAX:+86 571 83783179
  • ADD:Hangzhou Xiaoshan Economic Technological Development Zone, Nanyang
  • ©Hangzhou Disheng Coating Limited Company 浙ICP备18006354号-1 Powered by www.300.cn

  • scan a QR code
    to follow

Waterborne industrial coatings

Waterborne polyurethane finish

A two-component polyurethane anti-corrosion topcoat consisting of a synthetic resin, a coloring pigment, and a curing agent.
Quantity
-
+
没有此类产品
Description

Product introduction

A two-component polyurethane anti-corrosion topcoat consisting of a synthetic resin, a coloring pigment, and a curing agent.

 

Range of use

Used for water conservancy projects, crude oil storage tanks, general chemical corrosion, ships, steel structures, and other colored concrete facets that are resistant to sunlight exposure.

 

Feature Description

1. Good chemical resistance and water resistance.

2. Resistant to mineral oils, vegetable oils, petroleum solvents and other petroleum products.

3. The film is tough and shiny.

4. Dry quickly.

5. The film is heat-resistant, soft and sticky.

 

Instructions

Spraying. The surface of the object to be coated must be clean and dry. The rust treatment of the surface of the substrate can meet the requirements. Normally, water can be added to about 10% at room temperature. The tools used during construction must be dry and clean. The tools should be cleaned in good time. Finally, the waste paint bucket should be handled carefully to avoid environmental pollution. The ratio of the main paint and the curing agent is 10:1. After mixing, it must be stirred evenly. How much is used for dispensing is required. After use, it must be used within 2-3 hours. Can add about 10% of water, after the tool is used, it should be cleaned in time.

 

Technical Parameters

Item Technical indicators
Drying time (25°C) ≤1h
Impact strength ≥50cm
Flexibility ≤1mm
Aging period(25℃) 30min
Applicable period(25℃) 6h

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待