- TEL： +86-0571-83199839/ +86-571-82171320 / 15858113966
- FAX：+86 571 83783179
- ADD：Hangzhou Xiaoshan Economic Technological Development Zone, Nanyang
- ©Hangzhou Disheng Coating Limited Company 浙ICP备18006354号-1 Powered by www.300.cn
scan a QR code
Waterborne industrial coatings
Water-based inorganic zinc-rich primer
Epoxy zinc-rich primer is one of the most widely used products in industrial anti-corrosion. It is suitable for steel rust prevention in atmospheric environment and is widely used in anti-corrosion and weather-resisting coating of general anti-corrosion, chemical atmosphere, marine environment. Epoxy zinc-rich primers are superior in terms of rust resistance, adhesion, mechanical properties and supporting properties.
Epoxy zinc-rich primer is a two-component coating. Component I consists of epoxy resin, zinc powder, rust-proof pigments, additives and solvents. Component II is a curing agent.
The main purpose
Epoxy zinc-rich primer is suitable for corrosion and rust-preventing primers for steel components under atmospheric conditions, especially harsh corrosive environments or medium and long-term weathering requirements. Such as steel bridge primer, tank anti-corrosion primer, container anti-corrosion primer, steel anti-rust paint, hull primer, seaport facilities, anti-corrosion primer.
☆ Surface treatment
The surface treatment of epoxy zinc-rich primer steel shall meet the Sa2.5 grade specified in GB/T 8923, which is inconvenient for jet rust removal, and manual and power tool derusting to St3 level specified in GB/T 8923, steel surface roughness. For Rz 30μm ~ 75μm, and remove the surface of the oil.
After sandblasting is completed, the sandblasting residue is removed and the dust on the surface is cleaned using a vacuum cleaner or oil-free, anhydrous compressed air.
☆ Primer coating
Epoxy zinc-rich primer is recommended to use spraying method, air spraying or airless spraying. The film thickness is suitable for 70-80μm. The paint film is painted after 24 hours.
☆ Intermediate paint
The coating interval should not be too long. Observe whether the surface of the epoxy zinc-rich primer has zinc salts. If any, it should be promptly removed. Epoxy cloud iron middle paint was selected and sprayed 1-2 to achieve the specified film thickness.
☆ Top coat
Topcoats are generally made of anti-corrosion coatings with good decorativeness and excellent weather resistance, such as acrylic polyurethane topcoats, fluorocarbon topcoats, polysiloxane topcoats, etc. It is advisable to spray 2 coats, the paint film is smooth and flat, and the color is uniform.
|Film color and appearance||Gray, smooth surface|
|Non-volatile metal zinc content||≥70%|
(natural exposure 6 months)
|No blistering, no rust, no cracking, no peeling|